Hikvision DS-D42V06-N

Markaya göre filtrele

Hikvision DS-D42V06-N
Hikvision

Hikvision DS-D42V06-N

Model kodu
DS-D42V06-N
Sistem
Kamera sistemi

Ürün açıklaması

Türkçe çevirisi hazırlanıyor, şimdilik üretici sitesindeki İngilizce metin gösteriliyor.

Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device. Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled. An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync. The mosaic source is composed of two sources (2K×1K@60Hz) accessed to the OPT 1. Work with software to support brightness and chroma calibration on each LED, effectively removing color discrepancies and greatly improving LED display brightness and chroma consistency, allowing for better image quality. Up to 4 units cascaded for image mosaic

Teknik özellikler

Brightness Control 1-100 Levels
Frame Frequency 25HZ-60HZ
Grey Level 256
Display Color 1 Billion
Processing Depth 8bit
Image Scaling Support
Product Model DS-D42V06-N
Chassis Height 1.12U
Chassis Width 351.2mm
Average Consumption ≤28W
Number of power interfaces 1
Power interface specifications 100-240V~，1.6A，50/60Hz
Working Temperature -10°C ～ 45°C
Storage Humidity 10% ～ 95%
Working Humidity 20% ～ 90%
Storage Temperature -20°C ～ 70°C
Packaging Size (W × H × D) 565.0mm×175.0mm×450.0mm
Net Weight 4kg
Gross Weight 6.8kg
Dimensions (W × H × D) 483.6mm×351.2mm×50.1mm
Packing List DS-D42V06-N*1,Power Cable *4,Ethernet Cable *1,HDMI Cable *1,HDMI TO DVI Cable *1,USB Cable*1
Product Type LED Controller
Audio Input Interface(s) 1
Audio Input Interface Type HDMI inline
Video Input Interface(s) 4
Video Input Interface Type 2 HDMI1.3+1 3G-SDI+1 DVI
Max. Input Resolution 1080P
Video Input Resolution HDMI1.3 interface Supports 1920 x 1200@60Hz Video source input. Supports HDCP1.4. Not supporting interlaced signal input. Support custom resolution. Custom maximum width: 3840 (3840 x) 648@60Hz ） Custom maximum height: 2784 (800 x 2784@60Hz ） Support front-end device push input: 600 x 3840@60Hz HDMI 1.3-1 supports LOOP loop output. SDI interface Supports ST-424 (3G), ST-292 (HD), and ST-259 (SD) standard video source inputs. Single channel support 1920 x 1080@60Hz Video source input. Support de interlacing processing. Input resolution and bit depth settings are not supported. Supports 3G-SDI Loop output. DVI interface Supports 1920 x 1200@60Hz Video source input. Supports HDCP1.4. Interlaced signal input is not supported. Support custom resolution. Custom maximum width: 3840 (3840 x) 648@60Hz ） Custom maximum height: 2784 (800 x 2784@60Hz ） Support front-end device push input: 600 x 3840@60Hz DVI supports LOOP loop output.
Video Input Processing Characteristics Processing depth 8 Sampling format RGB:444 YUV:4:4:4 YUV:422
Max. Output Resolution 3.9 Million
Loading Capacity for Video Output to LED Single port with load 650000 Width 1~10240 Height 1~8192
LED Loading Interfaces 6
LED Loading Interface Type RJ45
Number of video ring pass output interfaces 2
Video looping output interface type HDMI 1.3+DVI
Video looping output resolution 1920×1200@60Hz
Audio Output Interface(s) NA
Audio Output Interface Type NA
Screen LCD screen
Key "knob": Select menus, adjust parameters, and confirm operations. ""ESC"": Exit the menu or cancel the operation. ""MAIN/PIP 1/PIP 2"": Layer on, off, and layer state display. ""SCALE"": Full screen auto zoom shortcut key, adaptively fills the window with the lowest priority to full screen. ""PRESET"": Enter the scene settings menu. ""TEST"": Enter the test screen settings menu. ""FREEZE"": Freeze the output screen. ""FN"": Customizable function shortcut key. ""HDMI1/HDMI2/DVI/SDI"" Input source status display, supporting one click switching of the main window input source.
pilot lamp "MAIN/PIP 1/PIP 2": Long blue light: The layer is turned on. Blue flashing: The layer is currently being edited. Long white light: The layer is not turned on. ""SCALE"":Long blue light: Full screen automatic scaling is enabled. Long white light: Full screen auto zoom is not enabled. ""HDMI1/HDMI2/DVI/SDI"": Long blue light: There is an input source connected. Blue flashing: No input source connected, already used by the layer. Long white light: No input source connected or input source abnormal.
Control network port "1 RJ45, 10M/100M/1000M adaptive Ethernet ports Connect and control the computer or router."
3D interface NA
IR input NA
Serial Interface 1, 1 debug serial port (RJ45)
Light perception LIGHT SENSOR：Connect the optical probe to obtain ambient brightness, which can achieve automatic adjustment of screen brightness.
USB 2 x USB 2.0
On-off Switch

Bu ürünü satan firmalar

1 firma
TESAN İLETİŞİM A.Ş
Bahçelievler, İstanbul

Bu site, hizmeti çalıştırmak için gerekli teknik çerezler kullanır. Pazarlama iletişimi izniniz talep formunda ayrıca ve işaretlenmemiş olarak sorulur. Detaylar için Çerez Politikası ve KVKK Aydınlatma Metni'ni inceleyebilirsiniz.