TESAN İLETİŞİM A.Ş
Bahçelievler, İstanbul
Eşleşen marka yok.
Türkçe çevirisi hazırlanıyor, şimdilik üretici sitesindeki İngilizce metin gösteriliyor.
Small size design, which can be put into wired detector easily. 433MHz two-way wireless communication. LED display, show the real status of device. With one tamper input and one PGM, can be used as zone input or alarm outpout. With 3.3v voltage output, can be used to power up external wired detector. Detection of device removal by accelerometer
| Serial port | 1 |
|---|---|
| Power switch | 1 |
| Alarm input | 1 Alarm, 1 Tamper |
| Alarm output | 1 PGM, AM/Output |
| 3.3v Output | 1, up to 10mA |
| Indicator | 3: Alarm/Tamper(Red), Fault(Amber), Signal Strength(Green/Red) |
| Power supply | 3 CR123 |
| Operation humidity | 10%~90% |
| Operation temperature | –10℃ ~ 55℃ |
| Power consumption | Quiescent current: 40.29 uA Max current: 47.85mA Voltage: 3 VDC |
| Battery life span | Up to 5 years (standby time) |
| RF frequency | 433MHz |
| RF method | Two-way communication |
| RF modulation | 2GFSK |
| RF distance | 1300m |
| Installation method | Put inside Wireless Ready Detector |
| Dimension(WxHxD) | 102*41*20mm |
| Weight | 35g(Without Battery), 90g(With Battery) |
Bu site, hizmeti çalıştırmak için gerekli teknik çerezler kullanır. Pazarlama iletişimi izniniz talep formunda ayrıca ve işaretlenmemiş olarak sorulur. Detaylar için Çerez Politikası ve KVKK Aydınlatma Metni'ni inceleyebilirsiniz.